Delivered flat-packed for self-assembly, with free UK mainland delivery on qualifying orders. Allow a full weekend for assembly and have at least one other capable adult available to help. Larger, heavier and multiroom models may require additional time and lifting assistance. A solid, level base and suitable delivery access are required.

For a complete setup, select Professional Installation and choose your preferred date, allowing for the stated production lead time. We’ll then arrange the installation around your requirements, including any additional preparation or works needed to accommodate your sauna where possible. Worth running our sauna build checker before delivery day, and our heater size calculator to confirm the heater this one needs.

Inside, this sauna holds about 11.0 m³ of air, about the size of a single bedroom. To get that properly hot you want roughly 9kW of heat, and the Harvia Cilindro PC90 9kW is the one we'd point you at. Anything between 9kW and 12kW will do the job, so it comes down to how it looks, how you control it and what you want to spend. Our heater size calculator shows how we got to that and lists every heater that fits this model.

A heater this size can usually run off a normal household supply, but it pulls a lot of power, so your fusebox needs to have room for it. Your electrician will tell you in five minutes whether yours does. Whichever heater you pick, check what it needs before you buy.

The heater gets wired straight into your electrics by a qualified electrician. Never a plug, never an extension lead. If you're near us in Leicestershire we can arrange the electrician for you for a fee, so it's all done in one go. There's more detail in our full guide to electric heater setup.

Two things worth doing before you buy: our running cost calculator tells you what a session will cost to heat, and our solar calculator works out the panels and battery you'd need if you'd rather run it from the sun.

Inside, this sauna holds about 11.0 m³ of air, about the size of a single bedroom. The Cozy 12 OG Wood Burning Heater is the stove we'd suggest for it, and anything from the 12kW to the 24kW will work. Our heater size calculator shows how we worked that out and what else fits.

A wood stove needs no electrics at all, but it does get extremely hot. It has to sit a set distance from the timber walls and benches, usually with a heat shield behind it, and something fireproof underneath in case an ember drops out. The stove instructions give you the exact distances. The walls are solid timber with no insulation layer, so it takes a bit longer to warm up.

The chimney runs up and out through the roof. This one has a rounded roof, so the collar has to be shaped to match it or rain will get in. The fire also needs air to burn, and the room needs a vent low down and another high up so fresh air comes in and damp gets out. Have a think about where the smoke will blow, in relation to your house, your neighbours and where you sit outside.

Before you build, run our sauna build checker. It checks your vents, bench heights, clearances and drainage in a couple of minutes and flags anything that'll cause you grief later. Our full guide to wood-fired heater setup covers the rest. It's also worth a quick check with your council, as some areas have rules about chimneys and smoke.

The Agnes 195 needs standard oval sauna care, with particular attention to the distinctive round window and porthole door design. After every session, leave the door open for twenty to thirty minutes to let the heat room dry out fully, preventing mould and staining on timber surfaces. Wipe benches down once cooled, and sand the interior lightly once or twice a year wherever group use creates the most contact wear.

The round window needs regular cleaning with a standard glass cleaner and soft cloth, given its prominent role in the distinctive porthole design; check for condensation after sessions and wipe down before closing up.

Externally, treat the curved Spruce exterior with a wood treatment every two to three years depending on weather exposure. Keep the base clear of debris and standing water, the same fundamental principle that applies to any outdoor timber sauna regardless of specific depth variant.

Production takes 10-12 weeks, plus 1-2 weeks dispatch time for haulage. Due to its size and weight, this sauna ships on an oversized pallet (typically around a tonne or more) and arrives kerbside on a flatbed truck. Free UK mainland shipping applies, but additional charges may apply by postcode for length, weight, or restricted access, quoted separately.

Because of its size and weight, this item cannot be unloaded by tail lift and unloading is not included in the price — it needs arranging in advance. Depending on your access, you have three options:

• Forklift – if there's space to move the pallet from the truck to its final position, this is the most cost-effective choice.
• HIAB – for lifting over a fence or wall near the road, a HIAB (truck-mounted crane) is a practical and affordable option.
• Crane – if the final position is far from the road and forklift access isn't possible, a crane will be needed.

Handballing is possible but requires a full team of able helpers and suitable lifting equipment at every stage, and is done at your own risk. We can help source a forklift, HIAB, or crane in your area for an additional fee — if you're unsure which suits your site, contact us before ordering and we'll advise. Please have a solid, level base and clear access ready before delivery. Final positioning is not included unless you use our installation team; once unloaded, moving and positioning the goods is your responsibility.