Solis 200 4-5 Person Wood Fired Hot Tub

The Solis 200 wood fired hot tub is built for real outdoor use rather than occasional summer evenings. The integrated stove sits within the unit so heat transfers directly into the water, reducing warm up time and fuel use compared to external heaters. Once up to temperature it holds heat well, making it practical for longer soaks or shared sessions.

The square footprint is easier to plan into decking layouts than round tubs, especially where space is defined by fencing or pergola posts. Inside, the moulded fibreglass seating allows several people to sit comfortably while still giving enough depth for proper immersion. It works well as part of a sauna and cold therapy routine, or simply as a quiet heat therapy space at the end of the day.

The thermally treated timber exterior handles year round outdoor placement and provides natural insulation. A fitted cover helps retain heat between uses and keeps debris out in open garden settings. Because the unit is delivered fully assembled there is no complex self build process. Position it on a level base with safe stove clearance and it is ready to fill and fire.

For homeowners creating a dedicated wellness area, this hot tub offers a reliable wood fired heating system, low electrical demand, and enough capacity for family or small group use without taking over the whole garden.

Model
Solis 200 4-5 person wood fired hot tub thermowood with cover.

Capacity
Suitable for four to five users.

Water Volume
Approximately 1500 litres.

External Dimensions
2050 mm length, 2050 mm width and 1050 mm height.

Construction
19 mm thermally treated timber exterior with moulded fibreglass internal liner.

Heating System
Integrated wood fired stove with internal fire chamber and direct water heat transfer.

Flue
Vertical chimney flue with heat shield.

Fuel Type
Suitable for dry seasoned firewood.

Insulation
Matching insulated cover included.

Power Requirement
No electrical connection required for operation.

Delivery Format
Supplied fully assembled.

Installation Requirements
Requires level load bearing base and safe stove clearance.

Weight
Net weight 225 kg and gross weight 275 kg.

Use Environment
Suitable for year round outdoor bathing use.

Enjoy these health benefits at home

Extended heat immersion
Larger water volume allows longer sessions without rapid temperature drop.

Group relaxation effect
Shared bathing promotes longer, lower stress recovery periods.

Stable thermal mass
Deep water depth supports consistent full body heat exposure.

Low impact hydrotherapy
Seated soaking reduces joint loading while maintaining circulation.

Outdoor cooling transition
Stepping out into open air supports gradual temperature normalisation.

Self installation and professional installation available

Water Supply Requirements

A suitable cold water feed should be planned in advance along with a safe drainage point for emptying and cleaning the tub. Hose fill is suitable for most installations, but a fixed supply can be installed if preferred. Ensure pipe routes are prepared before final positioning to avoid cutting through finished panels or surrounding decking.

Base Preparation

Installation is designed for a competent self build on a level, load bearing surface such as concrete, paving slabs or a reinforced decking subframe. The base must be flat, stable and capable of supporting the full operating weight of the hot tub when filled with water and bathers.

Access and Delivery

Delivered on a kerbside pallet, typically a minimum of 250 kg. Where access allows, a pump truck can move the pallet across solid, level ground. Individual components are sized for manual handling through standard garden access points.

Assembly Process

All primary structural elements are pre cut and supplied with stainless steel fixings and clear step by step instructions. The hot tub is assembled in its final position on the prepared base with appropriate clearance for the heater, flue, and safe circulation around the unit.

Ventilation and Drainage

Allow adequate airflow around the heater and maintain clear drainage beneath the tub to prevent standing water. Proper ventilation supports heater performance and helps protect the timber structure for long term outdoor use.

Delivery and collection options

Standard Delivery

Delivery to mainland UK is completely free, in stock items dispatch within 5 days. Contact us to arrange delivery dates that work for you. Additional charges apply to locations outside of UK mainland.

Please inspect your delivery within 24 hours of arrival for any damage that may have occurred during transit, so we can arrange a replacement as quickly as possible.

Your sauna is delivered kerbside to the nearest accessible point at your property, such as a driveway or pavement. Each delivery arrives clearly organised, well-protected and with full installation instructions included for a smooth and straightforward self-install.

Local Collection

You are welcome to collect your order from our warehouse in Leicester. Please note that the components are long and heavy, so a large van or flatbed truck will be required.

If you would like to arrange collection, kindly contact us to schedule a suitable date and time.

Returns and Refunds

You can return an order within 14 days of receiving it.

Please allow up to 14 days from sending the item to receive your refund.

How to Return Your Order

We'll collect the order from you. Collections are free if your order is damaged or faulty. If not, we charge a collection fee. To arrange a collection, please contact us.

Return your order for free by dropping it off at our Leicester warehouse, please contact us first.

Caring for your hot tub

Exterior Timber Maintenance

Protect all external timber cladding and exposed wooden components with a fully breathable wood paint or stain during or shortly after assembly. A high quality water based product such as Sadolin Superdec is recommended. Apply two to three coats for full coverage and refresh periodically. This helps minimise moisture absorption, protects against weathering and supports long term outdoor durability.

Inner Fibreglass Care

The fibreglass liner should be rinsed after use and periodically cleaned with a non abrasive, non chlorine cleaner suitable for composite bathing surfaces. Avoid harsh chemicals or scouring pads as these can dull the finish. Regular draining and wiping down will help maintain water quality, prevent biofilm build up and keep the bathing surface smooth and hygienic.

Heater Maintenance

For wood fired heaters, remove ash regularly and ensure the firebox and flue remain clear for safe airflow. Check all connections and seals before use and keep the heater exterior clean and free from debris. Stainless steel components can be wiped down to maintain appearance and prevent surface staining. Always allow the heater to cool fully before carrying out any maintenance.

Our warranty explained

Warranty

All hot tubs and outdoor bathing structures include a 2 year residential warranty covering manufacturing defects in structural timber, internal shell and factory supplied hardware. This applies only where the exterior timber has been treated and maintained as recommended. For rental, hospitality, spa or any revenue generating use, a 1 year commercial warranty applies.

The warranty covers defects in materials and workmanship under normal operating conditions.

Heaters, pumps, chillers, filtration systems and third party accessories are covered by their respective manufacturers.

Proof of purchase, confirmation of installation on a suitable level base and evidence of timber treatment may be required to support a claim.

What Is Covered

Manufacturing or construction defects in structural timber, internal fibreglass or stainless steel liner and factory supplied components.

Replacement of missing, damaged or faulty parts identified at delivery or during correct installation.

Technical support from our team to assess issues and coordinate replacement parts or specialist assistance where required.

What Is Not Covered

Natural timber movement, colour variation, surface cracking, resin release and normal weathering.

Minor cosmetic marks to internal liners that do not affect performance.

Issues caused by incorrect installation, inadequate base preparation, insufficient drainage or poor water management.

Misuse, operation without water, freezing of pipework, failure to maintain safe water chemistry or running pumps and heaters dry.

Unauthorised modification, non compliant electrical installation or use of incompatible third party equipment.

Installation And Use Requirements

The hot tub must be installed on a level, load bearing base suitable for the full operating weight when filled.

The exterior timber must be treated after installation and re treated periodically.

All electrical wiring, pumps, heaters and chillers must be installed and commissioned by a qualified electrician where required.

Water must be maintained within recommended chemical levels and protected from freezing conditions.

The hot tub is intended for normal residential use unless a commercial agreement is in place.

Maintaining Your Cover

Failure to meet installation, electrical, drainage or water maintenance requirements may invalidate the warranty.

Proof of purchase and installation details must be retained for any future claim.