Noosa 230 Outdoor Barrel Shower Spa Hot and Cold for Garden and Sauna

Model
Noosa 230 outdoor barrel spa shower.

Capacity
Single user outdoor rinse and recovery shower.

External Dimensions
Approximately 2310 mm height and 1350 mm width.

Internal Volume / Floor Area
Compact standing space designed for outdoor rinse use.

Layout
Open access barrel shower with overhead rinse position.

Wall Construction
Heat treated spruce thermowood for outdoor durability and stability.

Glazing and Door
Open front design with no glazing for ventilation and quick access.

Bench Configuration
Standing shower space with no fixed seating.

Roof Finish
Curved barrel roof profile in matching thermowood.

Base and Support
Designed for installation on a level hardstanding or concrete pad.

Ventilation
Open air design for natural airflow and fast drying.

Heater Compatibility
Compatible with external hot and cold water supply via standard plumbing connections.

Included Components
Pre assembled thermowood barrel body ready for positioning and connection.

Delivery Format
Delivered as a solid unit approximately 300 kg.

Installation Requirements
Requires level base and connection to hot and cold water feeds with suitable drainage provision.

Warranty
2 year residential warranty when external timber is treated, 1 year commercial use.

Self installation and professional installation available

Water Supply Requirements

A suitable hot and cold water feed must be planned in advance, along with a safe drainage point. Pipe routes should be prepared before final assembly to avoid cutting through finished panels.

Plumbing Connection

All water connections and commissioning should be completed in accordance with current regulations. This ensures safe operation, correct pressure control and warranty compliance.

Base Preparation

Installation is designed for a competent self build on a level, load bearing surface such as concrete, paving or a reinforced decking subframe. The base must be flat and stable to support the unit weight and maintain correct door alignment.

Access and Delivery

Delivered flat packed on a kerbside pallet, typically a minimum of 300 kg. Where access allows, a pump truck can move the pallet across solid, level surfaces. Individual components are sized for manual handling and standard garden access.

Assembly Process

All primary structural elements are pre cut and supplied with stainless steel fixings and clear step by step instructions. The structure is assembled in position on the designated support points with allowance for ventilation and drainage.

Ventilation and Drainage

Ensure adequate airflow around the unit and maintain clear drainage beneath the shower base to prevent standing water and support long term timber performance.

Caring for your shower

Exterior and Interior Maintenance

Protect all exterior and interior timber surfaces with a fully breathable wood paint during or immediately after assembly. We recommend a water based product such as Sadolin Superdec. Apply two to three coats for full coverage, then refresh periodically. This helps reduce moisture absorption, protects the timber from weathering and supports long term durability in wet conditions.

Our warranty explained

Warranty

All sauna cabins and outdoor wellness structures include a 2 year residential warranty covering manufacturing defects in structural timber and factory supplied hardware. This applies only where the exterior timber has been treated and maintained as recommended. For rental, hospitality, spa or any revenue generating use, a 1 year commercial warranty applies.

The warranty covers defects in materials and workmanship under normal operating conditions.

Heaters, electrical components and third party accessories are covered by their respective manufacturers.

Proof of purchase, confirmation of installation on a suitable level base and evidence of timber treatment may be required to support a claim.

What Is Covered

Manufacturing or construction defects in structural timber and factory supplied components.

Replacement of missing, damaged or faulty parts identified at delivery or during correct installation.

Technical support from our team to assess issues and coordinate replacement parts or specialist assistance where required.

What Is Not Covered

Natural timber movement, colour variation, surface cracking, resin release and normal weathering.

Issues caused by incorrect installation, inadequate base preparation or poor ventilation.

Misuse, failure to follow heater safety clearances or non compliant electrical installation.

Exposure to standing water, ground contact outside designated support points or unauthorised structural modification.

Installation and Use Requirements

The sauna must be installed on a level, load bearing base with adequate ventilation.

The exterior timber must be treated after installation and re treated periodically.

All electrical wiring and heater commissioning must be completed by a qualified electrician and in line with safety clearances.

The sauna is intended for normal residential use unless a commercial agreement is in place.

Maintaining Your Cover

Failure to meet installation, electrical or clearance requirements may invalidate the warranty.

Proof of purchase and installation details must be retained for any future claim.

Delivery and collection options

Standard Delivery

Delivery to mainland UK is completely free, in stock items dispatch within 5 days. Contact us to arrange delivery dates that work for you. Additional charges apply to locations outside of UK mainland.

Please inspect your delivery within 24 hours of arrival for any damage that may have occurred during transit, so we can arrange a replacement as quickly as possible.

Your sauna is delivered kerbside to the nearest accessible point at your property, such as a driveway or pavement. Each delivery arrives clearly organised, well-protected and with full installation instructions included for a smooth and straightforward self-install.

Local Collection

You are welcome to collect your order from our warehouse in Leicester. Please note that the components are long and heavy, so a large van or flatbed truck will be required.

If you would like to arrange collection, kindly contact us to schedule a suitable date and time.

Returns and Refunds

You can return an order within 14 days of receiving it.

Please allow up to 14 days from sending the item to receive your refund.

How to Return Your Order

We'll collect the order from you. Collections are free if your order is damaged or faulty. If not, we charge a collection fee. To arrange a collection, please contact us.

Return your order for free by dropping it off at our Leicester warehouse, please contact us first.