Fraser 210 Deluxe 2-4 Person Outdoor Sauna with Terrace

The Fraser 420 is the kind of sauna that changes how you use the garden. The terrace becomes part of the process rather than an afterthought. Sit outside while your body cools, then step back into dry heat without carrying moisture through the main space. It keeps the climate inside more stable and makes longer sessions more comfortable.

The long form layout gives you room to stretch out without pushing the heater too hard. Heat builds evenly across the benches and holds well in the 42 mm spruce walls, so you are not constantly waiting for temperature recovery between door openings. That matters if you are using it several times a week, which most people do once it becomes part of the routine.

Glass across the front keeps the interior from feeling enclosed while still holding warmth where it should be. In the evening you get that soft glow through the timber, and during the day it connects the space to the garden so it never feels cut off. It works just as well after a cold plunge as it does after a long walk or a gym session.

Installation is straightforward for a prepared base and the flat pack format means access is manageable even in tighter plots. Once in place it becomes a fixed part of the outdoor rhythm. Heat, air, rest, repeat. Simple, reliable and easy to keep using.

Model
Fraser 210 Deluxe 2-4 person outdoor sauna with integrated terrace

Capacity
Suitable for two to four users

External Dimensions
4170 mm depth, 2070 mm width, 2325 height

Internal Dimensions
2007 mm depth, 2007 mm width, 2057 mm height

Internal Volume / Floor Area
4.0 m²

Layout
Enclosed sauna room with adjacent open terrace

Wall Construction
Nordic spruce interlocking wall system, 42 mm wall thickness

Bench Configuration
Two tier aspen bench configuration with backrests

Door
8 mm tempered glass door

Glazing
Full height tempered glass front with 4 mm fixed panels

Roof Construction
Flat roof with self adhesive bitumen felt weather covering

Ventilation
Integrated ventilation system for controlled airflow

Lighting
Additional lighting options available

Heater Compatibility
Suitable for electric or wood fired sauna heaters

Base Requirements
Requires a level load bearing surface such as concrete, paving or ground screw system

Delivery Format
Flat pack for on site assembly

Weight
Approximately 1000 kg

Use Environment
Outdoor garden installation

Enjoy these health benefits at home

Terrace Cooling Transition
Stepping directly into fresh air supports gradual body cooling between heat cycles.

Stable Dry Heat Retention
Thick spruce walls maintain consistent temperature for deeper sweating sessions.

Reclined Muscle Recovery
Bench length allows lying posture which helps reduce back and leg tension.

Breathing Space Circulation
Long room shape improves airflow and reduces humid heat buildup.

Routine Based Contrast Therapy
Defined indoor and outdoor zones make repeat hot to cool cycles easier.

Self-installation and professional installation available

Electrical Requirements

A suitable electrical supply must be planned in advance according to the selected heater output and control system. Cable routing should be prepared before final assembly to avoid retrofitting through finished panels.

Qualified Electrical Connection

All electrical wiring, heater connection and commissioning must be completed by a qualified electrician in accordance with current regulations. This ensures safe load handling, correct operation and full warranty compliance.

Base Preparation

Installation is designed for a competent self build on a level, load bearing surface such as concrete, paving or a suitably reinforced decking subframe. The base must be flat and stable to support the unit weight and ensure correct door alignment and structural performance.

Access and Delivery

Delivered flat packed on a kerbside pallet, typically a minimum of 500 kg. Where access allows, a pump truck can be used to move the pallet across solid, level surfaces and position it closer to the installation area. Individual components are sized for manual handling, allowing them to pass through standard garden access points without cranes or lifting equipment.

Assembly Process

All primary structural elements are pre cut and supplied with stainless steel fixings, tension bands and clear step by step instructions. The cabin is assembled in position on the designated support points, with allowances for ventilation gaps and heater safety clearances.

Heater Position and Ventilation

Adequate space must be maintained around the heater location in line with manufacturer guidelines. Integrated ventilation points must remain unobstructed to ensure correct airflow, safe operation and consistent heat performance.

Delivery and collection options

Standard Delivery

Delivery to mainland UK is completely free, in stock items dispatch within 5 days. Contact us to arrange delivery dates that work for you. Additional charges apply to locations outside of UK mainland.

Please inspect your delivery within 24 hours of arrival for any damage that may have occurred during transit, so we can arrange a replacement as quickly as possible.

Your sauna is delivered kerbside to the nearest accessible point at your property, such as a driveway or pavement. Each delivery arrives clearly organised, well-protected and with full installation instructions included for a smooth and straightforward self-install.

Local Collection

You are welcome to collect your order from our warehouse in Leicester. Please note that the components are long and heavy, so a large van or flatbed truck will be required.

If you would like to arrange collection, kindly contact us to schedule a suitable date and time.

Returns and Refunds

You can return an order within 14 days of receiving it.

Please allow up to 14 days from sending the item to receive your refund.

How to Return Your Order

We'll collect the order from you. Collections are free if your order is damaged or faulty. If not, we charge a collection fee. To arrange a collection, please contact us.

Return your order for free by dropping it off at our Leicester warehouse, please contact us first.

Caring for your sauna

Exterior Protection and Maintenance

Protect the exterior of your sauna with a fully breathable wood paint during or immediately after assembly. We recommend a water based product such as Sadolin Superdec. Apply two to three coats for full coverage, then refresh every few years. This helps protect the timber from weathering, keeps the finish looking clean and supports long term durability in outdoor conditions.

Interior Maintenance

The internal walls, benches and backrests are factory treated for protection. Clean regularly with a soft damp cloth and allow the interior to dry fully after use by leaving the door open. We recommend applying a light coat of mineral oil periodically to benches and backrests to maintain the timber, reduce moisture absorption and keep the surface comfortable and hygienic.

Ventilation and Drying

After each session, allow fresh air to circulate by opening the door and any adjustable vents. Proper drying helps prevent moisture build up, supports timber stability and keeps the sauna environment fresh for the next use.

Heater Care and Safe Operation

Inspect the heater regularly to ensure stones are correctly stacked and air can circulate freely. Do not overfill the stone basket and only use approved sauna stones. Remove any broken or crumbling stones during routine checks. Keep heater safety clearances free from towels or combustible materials and never operate the heater without stones in place.

Electrical and Control Checks

Ensure all electrical connections are installed by a qualified professional and remain dry and protected. Periodically check the control unit for correct operation and avoid exposing it to excess moisture or direct water contact.

General Use Guidance

Use only clean water on sauna stones when producing steam and avoid additives unless approved by the heater manufacturer. Do not dry clothing inside the sauna as this restricts airflow and increases fire risk.

Seasonal Care

If the sauna will not be used for extended periods, ensure the interior is fully dry, clean all surfaces and disconnect power to the heater where appropriate.

Our warranty explained

Warranty

All sauna cabins and outdoor wellness structures include a 2 year residential warranty covering manufacturing defects in structural timber and factory supplied hardware. This applies only where the exterior timber has been treated and maintained as recommended. For rental, hospitality, spa or any revenue generating use, a 1 year commercial warranty applies.

The warranty covers defects in materials and workmanship under normal operating conditions.

Heaters, electrical components and third party accessories are covered by their respective manufacturers.

Proof of purchase, confirmation of installation on a suitable level base and evidence of timber treatment may be required to support a claim.

What Is Covered

Manufacturing or construction defects in structural timber and factory supplied components.

Replacement of missing, damaged or faulty parts identified at delivery or during correct installation.

Technical support from our team to assess issues and coordinate replacement parts or specialist assistance where required.

What Is Not Covered

Natural timber movement, colour variation, surface cracking, resin release and normal weathering.

Issues caused by incorrect installation, inadequate base preparation or poor ventilation.

Misuse, failure to follow heater safety clearances or non compliant electrical installation.

Exposure to standing water, ground contact outside designated support points or unauthorised structural modification.

Installation and Use Requirements

The sauna must be installed on a level, load bearing base with adequate ventilation.

The exterior timber must be treated after installation and re treated periodically.

All electrical wiring and heater commissioning must be completed by a qualified electrician and in line with safety clearances.

The sauna is intended for normal residential use unless a commercial agreement is in place.

Maintaining Your Cover

Failure to meet installation, electrical or clearance requirements may invalidate the warranty.

Proof of purchase and installation details must be retained for any future claim.